Twin hydraulic hose reel

 

pdfQuestionnaire to correctly define which hose reel is required

Technical data

Dimension sketch of hose reel with double hose and standard mounting flange

Dimension sketch of hose reel with double hose and small mounting angle

Dimension sketch of hose reel with double hose and large mounting angle

Storage capacity (length of hose that can be wound)

                                                                     NW = Nominal width = Inner diameter of the hose in mm

ModellDiameter of the Hose Reel (Maß A)NW08NW10NW12
up to max. 295 barup to max. 275 (300) barup to max. 240 (310) bar
Kompact 210-2215 mm1.50 m1.50 m-
Kompact 250-2255 mm2.50 m2.50 m-
Kompact 300-2305 mm4.00 m4.00 m2.40 m
Kompact 350-2355 mm6.00 m6.00 m3.60 m
Kompact 400-2405 mm8.00 m8.00 m5.50 m
Kompact 450-2455 mm9.00 m9.00 m7.00 m
Kompact 470-2475 mm10.00 m10.00 m7.50 m
Kompact 500-2505 mm12.50 m12.50 m9.00 m
Kompact 550-2555 mm15.00 m15.00 m11.00 m
Kompact 600-2605 mm18.00 m18.00 m12.50 m
Kompact 650-2655 mm21.00 m21.00 m15.00 m
Kompact 700-2690 mm23.50 m23.50 m18.00 m
Kompact 800-2800 mm30.50 m30.50 m24.00 m

Other dimensions available on request.

Hose reel inlet (inlet adapter) and hose reel outlet (hose end)

  • 10L (M16 x 1.5)
  • 12L (M18 x 1.5)
  • 15L (M22 x 1.5)
  • 12S (M20 x 1.5)
  • 14S (M22 x 1.5)
  • 16S (M24 x 1.5)
  • various BSP inch threads
  • others by request

Attention:

In the calculation, it must be taken into account that at least 30 cm of hose must remain on the reel.

If a permanently installed hose (hose that is never wound onto the reel) is available, the hose reels can also be supplied with more hose.

Advantages

  • many different options for attaching
  • 2-way hose reels have a welded double hose
  • available with detent for strain relief on demand.
  • low overall width
  • universal mounting plates or angles. This means that our Kompact series hose reels are easily interchangeable with most other brands on the market
  • available in right or left extraction direction
  • automatic return due to built-in safety return spring with long service life

Attachment

The hose reels are not delivered pre-tensioned. Pre-tensioning must be done in accordance with the operating instructions.

The hose reels can also be used as replacement reels for other brands by using different mounting flanges.














Standard mounting flange













Mounting angle for hose reels up to 400 mm Ø














Mounting angle for hose reels from 450 mm Ø

















Special angle CA













Special angle PA