The one-way hydraulic hose reel is designed to hold a single hydraulic hose reel and provides safe, organised and space-saving storage.
It ensures neat hose routing, protects the hose from damage and facilitates handling in daily use. Its robust construction makes it ideal for workshops, industrial applications and mobile use.
Questionairre to correctly determine which hose reel is required
Advantages
- Available with detent for strain relief on request
- Low overall width
- Available powder-coated or galvanised for even better corrosion resistance
- Universal mounting options thanks to universal mounting plates and angles: this means that our Kompact series hose reels can be easily exchanged for most other brands on the market
- Largely maintenance-free
- Long service life
- High stability
- Operates at working pressures of up to 310 bar (depending on the hose)
- Available in right or left-hand pull-our direction
- Automatic return thanks to built-in safety return spring with long serveice life
- Matching accessories available:
- Swivel joints: for a rotatable connection of hydraulic hoses
- Roller fairlead: for guiding and supporting hydraulic hoses
- Hose stopper for a single hose: mechanical stop to prevent further retraction of the hose
- Crocodile: as bend protection for hoses
- Deflection pulley: for hose return
Technical data
The following table shows how much hose can be wound onto the corresponding reels:
Capacity (winding length of hose)
NW = Nominal width = Inner diameter of the hose in mm
| Modell | Diameter of the Hose Reel (Maß A) | NW08 | NW10 | NW13 |
|---|---|---|---|---|
| up to max. 295 bar | up to max. 275 (300) bar | up to max. 240 (310) bar | ||
| Kompact 210-1 | 215 mm | 1.50 m | 1.50 m | - |
| Kompact 250-1 | 255 mm | 2.50 m | 2.50 m | - |
| Kompact 300-1 | 305 mm | 4.00 m | 4.00 m | 2.40 m |
| Kompact 350-1 | 355 mm | 6.00 m | 6.00 m | 3.60 m |
| Kompact 400-1 | 405 mm | 8.00 m | 8.00 m | 5.50 m |
| Kompact 450-1 | 455 mm | 9.00 m | 9.00 m | 7.00 m |
| Kompact 470-1 | 475 mm | 10.00 m | 10.00 m | 7.50 m |
| Kompact 500-1 | 505 mm | 12.50 m | 12.50 m | 9.00 m |
Other dimensions available on request.
Attention:
The calculation must take into account that at least 30 cm of hose must remain on the reel.
If permanently installed hose (hose that is never wound onto the reel) is present, the hose reels can also be supplied with more hose.
Reel inlet (inlet adapter) and reel outlet (hose end)
- 10L (M16 x 1,5)
- 12L (M18 x 1,5)
- 15L (M22 x 1,5)
- 12S (M20 x 1,5)
- 14S (M22 x 1,5)
- 16S (M24 x 1,5)
- various BSP inch threads
- others by arrangement
Mounting
The reels are not pre-tensioned when delivered. pre-tensioning must be carried out in accordance with the operating instructions.
The reels can also be mounted as replacement for other manufacturers’ products. Various mounting flanges are available for this purpose:
 Standard mounting flange |  Mounting angle for reels up to 400mm Ø |  Mountiung angle for reels from 450mm Ø |  Special angle CA |  Special angle PA |