pdfQuestionnaire to correctly define which hose reel is required
Technical data
Dimension sketch
Storage capacity (length of hose that can be wound)
NW = Nominal width = Inner diameter of the hose in mm
| Modell | Diameter of the Hose Reel (Maß A) | NW08 | NW10 | NW12 |
|---|---|---|---|---|
| up to max. 295 bar | up to max. 275 (300) bar | up to max. 245 (310) bar | ||
| Kompact 300-4 | 305 mm | 4.00 m | 4.00 m | 2.40 m |
| Kompact 350-4 | 355 mm | 6.00 m | 6.00 m | 3.60 m |
| Kompact 400-4 | 405 mm | 8.00 m | 8.00 m | 5.50 m |
| Kompact 450-4 | 455 mm | 9.00 m | 9.00 m | 7.00 m |
| Kompact 470-4 | 475 mm | 10.00 m | 10.00 m | 7.50 m |
| Kompact 500-4 | 505 mm | 12.50 m | 12.50 m | 9.00 m |
| Kompact 550-4 | 555 mm | 15.00 m | 15.00 m | 11.00 m |
| Kompact 600-4 | 605 mm | 18.00 m | 18.00 m | 12.50 m |
| Kompact 650-4 | 655 mm | 21.00 m | 21.00 m | 12.00 m |
| Kompact 700-4 | 690 mm | 23.50 m | 23.50 m | 18.00 m |
Other dimensions available on request.
Hose reel inlet (inlet adapter) and hose reel outlet (hose end)
- 10L (M16 x 1.5)
- 12L (M18 x 1.5)
- 15L (M22 x 1.5)
- 12S (M20 x 1.5)
- 14S (M22 x 1.5)
- 16S (M24 x 1.5)
- various BSP inch threads
- others by request
Attention:
In the calculation, it must be taken into account that at least 30 cm of hose must remain on the reel.
If a permanently installed hose (hose that is never wound onto the reel) is available, the hose reels can also be supplied with more hose.
Advantages
- many different options for attaching
- universal mounting plates or angles. This means that our Kompact series hose reels are easily interchangeable with most other brands on the market
- available in right or left extraction direction
- automatic return due to built-in safety return spring with long service life
- Since the 4-way hose becomes very rigid due to the welding and is therefore difficult to roll up, we equip our drums with two double hoses separated by dividing plates
- these hose reels are more cost-effective than two twin hose reels, and there are no installation costs for a second hose reel
Attention: For the 4-way hose reels, changing the direction of rotation at a later date is only possible at our premises! Therefore, please consider which direction of rotation is required before ordering.
Attachment
The hose reels are not delivered pre-tensioned. Pre-tensioning must be done in accordance with the operating instructions.
All 4-way hose reels are supplied with a mounting plate (4-way mounting flange) for attachment.
Attachment with 4-way mounting flange